Home›Farm tractors›John Deere›4020

John Deere 4020

1963 – 1972Farm tractor

The John Deere 4020 is a farm tractor produced from 1963 to 1972. The available specifications cover 4 engine configurations and 2 transmission options; equipment could vary by production year and market.

ManufacturerJohn Deere

CategoryFarm tractor

Engine options4

Transmissions2

Typical uses

  • ✓
    Row-crop field work

    Its row-crop configuration is intended for cultivation and work between planted rows.

  • ✓
    PTO and three-point implements

    Compatible with PTO-driven equipment and mounted implements through the rear three-point hitch.

  • ✓
    Field and transport duties

    Useful for moving loads, field operations and general transport around the farm.

General specifications

Production

Production years1963–1972
ManufacturerJohn Deere
FactoriesWaterloo, Iowa, USA
FactoriesMexico
Total built184,879 (total)
Total built8,123 (gas)
Total built8,445 (LP)
Total built168,311 (diesel)
Total built17,732 (standard)
Row-Crop tractor
Original price$10,345 in 1972

≈ $83,500 in 2026 dollarsInflation-adjusted estimate based on U.S. CPI-U. Not a current market value.

Power ratings

Drawbar (tested)83.79 hp (62.5 kW)
PTO (tested)95.83 hp (71.5 kW)

Mechanical

Power steering
Hydraulic wet disc brakes
Open operator station. Cab optional.
Drive4x2 2WD
: 4x4 HFWD 4WD * Front-wheel assist was optional after 1969.
Differential lockmechanical rear (optional)

Capacities

LP-gas Fuel45 gal (170.3 L)
Power Shift Hydraulic system12 gal (45.4 L)

Hydraulics

Typeclosed center
Power Shift Capacity12 gal (45.4 L)
Total flow18 gpm (early) 68.1 lpm
Pressure2250 psi 155.1 bar
Valves1
SCV flow6 gpm (22.7 L/min)
View detailed hydraulics

Dimensions

Row crop Wheelbase97.5 in (247 cm)
Standard Wheelbase100.25 in (254 cm)
Length151 in (383 cm)
Width89.6 in (227 cm)
Front tread48.5 to 82.25 in (123 to 208 cm)
Rear tread60 to 91 in (152 to 231 cm)
Rear tread66 to 97 in (167 to 246 cm) (long axle)
Rear tread67 to 105 in (170 to 266 cm) (extra long axle)
Operating8,645 lb (3,921 kg) — gas syncro
Operating8,945 lb (4,057 kg) — diesel syncro
Operating9,240 lb (4,191 kg) — gas powershift
Operating9,560 lb (4,336 kg) — diesel powershift
Ballasted13980 lbs * Diesel Powershift with 18.4-34 rear tires with fluid plus front and rear cast iron weights. 6341 kg
View detailed dimensions

Dimensions

Row crop Wheelbase97.5 in (247 cm)
Standard Wheelbase100.25 in (254 cm)
Length151 in (383 cm)
Width89.6 in (227 cm)
Regular rear axle3.375 by 91 in 85 by 2311 mm
Long rear axle3.375 by 104 in 85 by 2641 mm
Extra long rear axle3.375 by 112 in 85 by 2844 mm
Front tread48.5 to 82.25 in (123 to 208 cm)
Rear tread60 to 91 in (152 to 231 cm)
Rear tread66 to 97 in (167 to 246 cm) (long axle)
Rear tread67 to 105 in (170 to 266 cm) (extra long axle)
View detailed dimensions

Dimensions · John Deere 4020 Weight

Shipping8,436 lb (3,826 kg) — diesel syncro
Shipping8,225 lb (3,730 kg) — gas syncro
Shipping8,319 lb (3,773 kg) — LP syncro
Operating8,645 lb (3,921 kg) — gas syncro
Operating8,945 lb (4,057 kg) — diesel syncro
Operating9,240 lb (4,191 kg) — gas powershift
Operating9,560 lb (4,336 kg) — diesel powershift
Ballasted13980 lbs * Diesel Powershift with 18.4-34 rear tires with fluid plus front and rear cast iron weights. 6341 kg
View detailed dimensions

Tires

Agricultural front6.00-16
Agricultural front7.50-18
Agricultural rear15.5-38
Agricultural rear18.4-34

Electrical

Groundpositive
Charging systemalternator
Charging amps55
Battery volts12
Batteries2
Battery capacity (Ah)75

Serial numbers

Serial number plate on the rear of the 4020 transmission case.
196465000
196591000
1966119000
1967145660
1968173982
1969201000
1970222160
1971250000
1972260791
Final270288
Tractor.info